The support you need for Filter units.

The DV1 filter unit is specially designed for air ducts with large air flows. Unlike filter motors, which have their own fans, the DV1 filter unit has no fans as it uses the air flow already present in the ventilation ducts.

DV1 has been specially designed to be applied inside air treatment ducts.
DV1 is a module applicable to ducts of any type of environment such as offices, hotels, gyms, hospitals, etc.
DV1 can be either inserted into an existing duct or connected to a duct with a purpose-built module.

All that is required for the application of DV1 is the presence of a power supply.

DV1 requires very little maintenance.
Normally once or twice a year, depending on the pollution in the environment, we recommend “regenerating” the ceramic filters to restore their original performance, which may diminish over time due to residues deposited during purification. The procedure requires rinsing the ceramic filters with running water or placing them in a common oven at 200°C for 2 hours, then re-installing them.
DV1 is designed to be easily “pulled out” of the duct for maintenance purposes.

Sure! The DV1 module can be replicated in several units depending on the size of the duct and requirements.

No, DV1 uses the air flow already present in the duct and therefore does not need any fan.

The V-shaped arrangement of the filter modules allows greater contact between air and photocatalytic filters, resulting in greater purification performance.

We are always open to discuss new applications. You can fill in the dedicated form to start a discussion phase with our technicians.